Lo-Lite Bar - M A N

A scale lo-lite bar suitable for the Tamiya M A N kit.  The light bar is in polished aluminium and has seven lenses.  The kit contains fibre optics, wiring, LEDs, and light tube.  In fact everything you need except for a bit of solder and two part epoxy.

LED colours available: clear, red, blue, amber and green.  Please state which colour required when ordering.

This light bar is suitable for use with 7.2 volts.  

 Price:   £25.00 

(postage free to UK, rest of world at cost)

 Lo-Lite Bar - Scania

A scale light bar suitable for either of Tamiya's Scanias.  The light bar is in polished aluminium and has seven lenses.  The kit contains fibre optics, wiring, LEDs, light tube and stainless steel fixing.  In fact everything you need except for a bit of solder and two part epoxy.

LED colours available: clear, red, blue, yellow and green.  Please state which colour required when ordering.

This light bar is suitable for use with 7.2 volts. 

 Price:   £25.00 

(postage free to UK, rest of world at cost)

 Lo-Lite Bar - Aeromax

A light bar suitable for Tamiya's Aeromax.  The light bar is in polished aluminium and has five lenses spaced to match the roof lights on the Aeromax.  The kit contains fibre optics, wiring, LEDs, and light tube.  In fact everything you need except for a bit of solder and two part epoxy.

LED colours available: clear, red, blue, yellow and green.  Please state which colour required when ordering.

This light bar is suitable for use with  7.2 volts. 

Price:   £25.00 

  Etched Stainless Steel

Etched stainless steel grill set for Tamiya Scanias 

This stainless steel grill set is made exactly to the dimensions given by Tamiya for their Scania front grills.  Beautifully etched diamond mesh with border.  Fits beautifully to all the front grill spaces with just a little bit of two-part epoxy.  Can be painted or left stainless colour

Price per set - £10.00 inc p&p to UK

This has been done in heavy duty 0.025 inch thick stainless and at the moment is available in two sizes 

A4 size sheet - £28.00 + £1.50 p&p

85mm x 225mm - £9.50 + £1.50 p&p

We also stock etched square mesh and etched diamond mesh. 

These are in a slightly thinner gauge of stainless steel making them great for radiators and vents etc  The size of these meshes is 130mm x 110mm

£6.50 + £1.50 p&p

Larger sized sheets of the mesh are available.  Please ring or email for prices.

 HINGE-DOWN BULL BAR

This  aluminium bull bar comes complete with stainless steel hinge and support that has hidden fixing to the bumper and supports the bull bar when locked upright and also allows the bull bar to be tilted down to horizontal when you need to tilt the cab to gain access.

The kit contains bull bar and stainless steel hinge pocket plus fixings.  All you need to do is drill a couple of holes and a little soldering or two part epoxying to fit it to your Scania, Volvo or any cab over.

This bull bar is available in polished aluminium and acid etch light grey ready for you to paint

 Price:   £25.00 

(postage £1.50 to UK, rest of world at cost)

 AIR HORNS

These two tone air horns are injection moulded in white plastic ready for painting and attaching to your model either on their base or mounted separately. 

 Price:   £1.50 p&p

 AUXILLARY BATTERY PACKS FOR LIGHTING ETC

NI-MH 6 volt 2/3 A size 1000 mah hump pack

Dimensions: 50.4 x 27.3 x 30.8mm

Weight: 105g

With Futaba and JST connectors.  This pack is perfect for tucking away in various parts of your truck to power auxillary systems

 Price: £4.95 + £1.50 p&p

Tamiya Scania Right Hand Drive Dashboard Conversion

This right hand drive conversion was mastered for us by 'Ed's Custom Truckz'.  It is ready to be primed and painted to suit your interior and fits the cab in exactly the same way as the Tamiya original.  It takes the Tamiya bezel and steering wheel although if needed we can supply these two at a small additional cost.

 Price:   £25.00 + £1.50 p&p

CUSTOM LENGTH STAINLESS STEEL PROPSHAFT

This stainless steel propshaft is manufactured in a high strength stainless that has very fine grain structure.  This has been used to give a very good life expectancy.

This propshaft is a direct replacement for the weaker parts found in such trucks as the Knighthauler.  The propshaft is also available in any custom length you require.  It is supplied balanced and ready to use.

Up to 60cm £25.00

Above 60cm please ask for quote

FIFTH WHEEL

This is an upgrade part for 1/14th scale tractor units.  It is a direct replacement of the Tamiya fifth wheel and hook.  Made of aluminium this unit uses stainless steel CSK nuts and bolts to attach it to the Tamiya fixing points giving a much stronger fifth wheel connection but no machining for the modeller is needed

This photograph is of our pre-production test piece.  

 Price:   To be confirmed

With twin bore exit to fit Tamiya Sania 470 and the Volvo FH.  These side pipes were mastered for us by Stuart.  They come as a pair ready for easy fitting (around 5 minutes)

Price: £25.00 inc p&p

 STAINLESS STEEL VISOR WITH WORKING SPOTLIGHTS 

Available in either two or four spotlight versions.  These visors are manufactured from stainless steel and the kit contains the visor, clear resin spotlights, LEDs and all items to complete the job except for a little bit of two part expoxy and solder.  There is no drilling required to fit your cab.  They will fit either top line of hi-line. 

Price: £25.00 (4 spot)

£22.00 (2 spot)

+ £1.50 p&p

3 SPOT IN GRILLE LIGHT BAR TO FIT TAMIYA M A N

Inspired by the in grill light bars of R Adams & Son. This kit contains all the parts needed to replicate the original item.  Comes complete with full instructions just a little bit of two part expoxy and solder needed. 

Price: £16.00 + £1.50 p&p

4 SPOT LIGHTING KIT (OBLONG OR ROUND)

4 individual aluminium spot lights with threaded support.  Ready to be bolted wherever extra light is needed on your vehicle.  The kit contains all parts needed except for some solder and two part expoxy glue.  Please state whether round or oblong required

Price: £18.00 + £1.50 p&p

SCANIA LOW ROOF CONVERSION 

This is a resin conversion for the Tamiya Scania and is the mid height roof found on many tippers and wagon and drags, along with other special uses. An easy screw on conversion. Speakers etc can still be fitted in the roof as the inside is correctly shaped.

Price: £30.00 + £2.00 p&p